Teqja International – Pipes for drinking water PE100 RC
High-density polyethylene pipe for transporting drinking water under pressure
Description
Produced with homogeneous HDPE with granules of PE100 RC origin with high resistance to scratches and impacts according to the technical specifications of DIN PAS 1075
The pipe is manufactured by Teqja International sha equipped with the following certificates of the administration system:
- Quality according to EN ISO 9001:2015
- Environment according to EN ISO 14001:2015
- Security according to EN ISO 45001:2018
Sustainability standards
- We implement the code of ethics and the management and control organization model in accordance with Legislative Decree 231/01
- The product fully bears the mark of conformity, referring to the building regulations, issued by a third-party certification body accredited according to EN ISO/IEC 17065/2012 and EN ISO/IEC 17020/2012 standards (product conformity certification),
- The tubes are in accordance with the health and hygiene requirements of the Ministry of Health regarding products for liquid food and are in accordance with the UNI EN 1622 standard "determination of odor threshold and taste threshold".
- The pipe is third-party certified for installation with alternative laying techniques, without excavation, made of PE100 "Crack Resistant" material, PE100-RC according to DIN PAS 1075 specification
- We ensure the delivery of pipes by means of transport operating with a security management system for the supply chain according to UNI ISO 28000, certified and validated by an accredited third party body
Technical Documents
Pipe PE100 RC – Brochure
Technical Documents
PVC Pipe – Brochure
PHYSICAL PARAMETERS OF RAW MATERIAL: PE100 RC
| Densità media | g/cm3 | > 0.94 | ISO 1183 |
| Indice di fluidità 5kg 190°C | g/10min | 0.2 – 1.4 | EN ISO 1133 |
| Contenuto di umidità | mg/kg | < 300 | EN ISO 15512 |
| O.I.T. (200°C) | min | > 20 | ISO 11357-6 |
| Tenore di carbon-black | % | 2 – 2.5 | ISO 6964 |
| SCG (Notch test) | h | > 8760 | ISO 13479 |
| FNCT (Full notch creep test) | h | > 8760 | ISO 16770 |
| PLT (Point loading test) | h | > 8760 | PAS 1075 |
Table of dimensions
| SDR41 S20 | SDR33 S16 | ||||
| DN/OD | dem,max | PN4 | PN5 | ||
| emin | emax | emin | emax | ||
| 315 | 316.9 | 7.7 | 8.6 | 9.7 | 10.8 |
| 355 | 357.2 | 8.7 | 9.7 | 10.9 | 12.1 |
| 400 | 402.4 | 9.8 | 10.9 | 12.3 | 13.7 |
| 450 | 452.7 | 11 | 12.2 | 13.8 | 15.3 |
| 500 | 503 | 12.3 | 13.7 | 15.3 | 17 |
| 560 | 563.4 | 13.7 | 15.2 | 17.2 | 19.1 |
| 630 | 633.8 | 15.4 | 17.1 | 19.3 | 21.4 |
| SDR26 S12.5 | SDR21 S10 | ||||
| DN/OD | dem,max | PN6 | PN8 | ||
| emin | emax | emin | emax | ||
| 63 | 63.4 | 3 | 3.4 | ||
| 75 | 75.5 | 3.6 | 4.1 | ||
| 90 | 90.6 | 3.5 | 4 | 4.3 | 4.9 |
| 110 | 110.7 | 4.2 | 4.8 | 5.3 | 6 |
| 125 | 125.8 | 4.8 | 5.4 | 6 | 6.7 |
| 140 | 140.9 | 5.4 | 6.1 | 6.7 | 7.5 |
| 160 | 161 | 6.2 | 7 | 7.7 | 8.6 |
| 180 | 181.1 | 6.9 | 7.7 | 8.6 | 9.6 |
| 200 | 201.2 | 7.7 | 8.6 | 9.6 | 10.7 |
| 225 | 226.4 | 8.6 | 9.6 | 10.8 | 12 |
| 250 | 251.5 | 9.6 | 10.7 | 11.9 | 13.2 |
| 280 | 281.7 | 10.7 | 11.9 | 13.4 | 14.9 |
| 315 | 316.9 | 12.1 | 13.5 | 15 | 16.6 |
| 355 | 357.2 | 13.6 | 15.1 | 16.9 | 18.7 |
| 400 | 402.4 | 15.3 | 17 | 19.1 | 21.2 |
| 450 | 452.7 | 17.2 | 19.1 | 21.5 | 23.8 |
| 500 | 503 | 19.1 | 21.2 | 23.9 | 26.4 |
| 560 | 563.4 | 21.4 | 23.7 | 26.7 | 29.5 |
| 630 | 633.8 | 24.1 | 26.7 | 30 | 33.1 |
| SDR17 S8 | |||
| DN/OD | dem,max | PN10 | |
| emin | emax | ||
| 50 | 50.4 | 3 | 3.4 |
| 63 | 63.4 | 3.8 | 4.3 |
| 75 | 75.5 | 4.5 | 5.1 |
| 90 | 90.6 | 5.4 | 6.1 |
| 110 | 110.7 | 6.6 | 7.4 |
| 125 | 125.8 | 7.4 | 8.3 |
| 140 | 140.9 | 8.3 | 9.3 |
| 160 | 161 | 9.5 | 10.6 |
| 180 | 181.1 | 10.7 | 11.9 |
| 200 | 201.2 | 11.9 | 13.2 |
| 225 | 226.4 | 13.4 | 14.9 |
| 250 | 251.5 | 14.8 | 16.4 |
| 280 | 281.7 | 16.6 | 18.4 |
| 315 | 316.9 | 18.7 | 20.7 |
| 355 | 357.2 | 21.1 | 23.4 |
| 400 | 402.4 | 23.7 | 26.2 |
| 450 | 452.7 | 26.7 | 29.5 |
| 500 | 503 | 29.7 | 32.8 |
| 560 | 563.4 | 33.2 | 36.7 |
| 630 | 633.8 | 37.4 | 41.3 |
| SDR13.6 S6.3 | SDR11 S5 | ||||
| DN/OD | dem,max | PN12.5 | PN16 | ||
| 32 | 32.3 | 3 | 3.4 | ||
| 40 | 40.4 | 3 | 3.5 | 3.7 | 4.2 |
| 50 | 50.4 | 3.7 | 4.2 | 4.6 | 5.2 |
| 63 | 63.4 | 4.7 | 5.3 | 5.8 | 6.5 |
| 75 | 75.5 | 5.6 | 6.3 | 6.8 | 7.6 |
| 90 | 90.6 | 6.7 | 7.5 | 8.2 | 9.2 |
| 110 | 110.7 | 8.1 | 9.1 | 10 | 11.1 |
| 125 | 125.8 | 9.2 | 10.3 | 11.4 | 12.7 |
| 140 | 140.9 | 10.3 | 11.5 | 12.7 | 14.1 |
| 160 | 161 | 11.8 | 13.1 | 14.6 | 16.2 |
| 180 | 181.1 | 13.3 | 14.8 | 16.4 | 18.2 |
| 200 | 201.2 | 14.7 | 16.3 | 18.2 | 20.2 |
| 225 | 226.4 | 16.6 | 18.4 | 20.5 | 22.7 |
| 250 | 251.5 | 18.4 | 20.4 | 22.7 | 25.1 |
| 280 | 281.7 | 20.6 | 22.8 | 25.4 | 28.1 |
| 315 | 316.9 | 23.2 | 25.7 | 28.6 | 31.6 |
| 355 | 357.2 | 26.1 | 28.9 | 32.2 | 35.6 |
| 400 | 402.4 | 29.4 | 32.5 | 36.3 | 40.1 |
| 450 | 452.7 | 33.1 | 36.6 | 40.9 | 45.1 |
| 500 | 503 | 36.8 | 40.6 | ||
| 560 | 563.4 | 41.2 | 45.5 | ||
| SDR9 S4 | SDR7.4 S3.2 | ||||
| DN/OD | dem,max | PN20 | PN25 | ||
| 20 | 20.3 | 3 | 3.4 | ||
| 25 | 25.3 | 3 | 3.4 | 3.5 | 4 |
| 32 | 32.3 | 3.6 | 4.1 | 4.4 | 5 |
| 40 | 40.4 | 4.5 | 5.1 | 5.5 | 6.2 |
| 50 | 50.4 | 5.6 | 6.3 | 6.9 | 7.7 |
| 63 | 63.4 | 7.1 | 8 | 8.6 | 9.6 |
| 75 | 75.5 | 8.4 | 9.4 | 10.3 | 11.5 |
| 90 | 90.6 | 10.1 | 11.3 | 12.3 | 13.7 |
| 110 | 110.7 | 12.3 | 13.7 | 15.1 | 16.8 |
| 125 | 125.8 | 14 | 15.6 | 17.1 | 19 |
| 140 | 140.9 | 15.7 | 17.4 | 19.2 | 21.3 |
| 160 | 161 | 17.9 | 19.8 | 21.9 | 24.2 |
| 180 | 181.1 | 20.1 | 22.3 | 24.6 | 27.2 |
| 200 | 201.2 | 22.4 | 24.3 | 27.4 | 30.3 |
| 225 | 226.4 | 25.2 | 27.9 | 30.8 | 34 |
| 250 | 251.5 | 27.9 | 30.8 | 34.2 | 37.8 |
| 280 | 281.7 | 31.3 | 34.6 | 38.3 | 42.3 |
| 315 | 316.9 | 35.2 | 38.9 | ||
| 355 | 357.2 | 39.7 | 43.8 | ||
EN 
SQ